- Home
- About Us
- Products
- HOT
- Applications
- News & Media
- Contact Us
 |
| Quantity: | |
|---|---|
BD-027B2835A-Z
Bowang
| Led Qty | 27pcs 2835 LEDs |
| Voltage | DC12V |
| Power | 3.7W |
| Dimension | 95*42.2*25.5mm |
| Working temperature | -40ºC~75ºC |
| Trade terms | EXW,FOB or CIF |
High transmittance is PMMA material with stainless steel housing。
With IP67 waterproof design,will prevent from any sand,water,dirt snow and dust.
Super bright LEDs,dependable perfoemance can increases the visibility for the boat.
LED boat lights,other colors are also available.
Universal fit for any application you need.
Easy installation,just use two screws to firm the led lights for boat on the boat's surface, and then add waterproof glue between the hull and the light,and wire to wire connection.
-Made by marine-grade epoxy resin glue to make this marine/boat LED lights for boat tight and seamless, which can be used for a long time at a depth .
-Material of stainless steel 316 cover stays smooth without any rust even in the saltwater, and 2/5” thick rubber pad will keep the distance between the boat lights and the hull, preventing the hull rust.
-Our marine marker lights (10-36V) are have 27pcs 2835 LED chips have efficient heat dissipation and 50000 work hours lifespan.
-Can be used as transom lights, courtesy lights, interior lights, deck lights, dock lights, stern lights, underdeck lights, and perfectly fits kayak, pontoon, fishing boat, jon boat, Boston boat.
| Led Qty | 27pcs 2835 LEDs |
| Voltage | DC12V |
| Power | 3.7W |
| Dimension | 95*42.2*25.5mm |
| Working temperature | -40ºC~75ºC |
| Trade terms | EXW,FOB or CIF |
High transmittance is PMMA material with stainless steel housing。
With IP67 waterproof design,will prevent from any sand,water,dirt snow and dust.
Super bright LEDs,dependable perfoemance can increases the visibility for the boat.
LED boat lights,other colors are also available.
Universal fit for any application you need.
Easy installation,just use two screws to firm the led lights for boat on the boat's surface, and then add waterproof glue between the hull and the light,and wire to wire connection.
-Made by marine-grade epoxy resin glue to make this marine/boat LED lights for boat tight and seamless, which can be used for a long time at a depth .
-Material of stainless steel 316 cover stays smooth without any rust even in the saltwater, and 2/5” thick rubber pad will keep the distance between the boat lights and the hull, preventing the hull rust.
-Our marine marker lights (10-36V) are have 27pcs 2835 LED chips have efficient heat dissipation and 50000 work hours lifespan.
-Can be used as transom lights, courtesy lights, interior lights, deck lights, dock lights, stern lights, underdeck lights, and perfectly fits kayak, pontoon, fishing boat, jon boat, Boston boat.
