+86 18925518137
Home » Products » LED Tail Light » Universal » 2.5“inch Red Led tail Light with Rubber

loading

Share to:
sharethis sharing button

2.5“inch Red Led tail Light with Rubber

1.Each led tail light equipped with 13 pieces of LED diodes
2.Better heat distribution, no glare, brighter and more energy-efficient than halogen bulbs, guarantee maximum visibility and safety even in harsh weather.
3.Exquisite appearance with sealed design and waterproof feature.
Availability:
Quantity:
  • BD-013R05ANA-A

  • Bowang


2.5 inch led tail light,Red Led Tail Light,led tail light with rubber,2.5 inch red led tail rlight,2.5 inch led tail light with rubber

2.5 inch led tail light,Red Led Tail Light,led tail light with rubber,2.5 inch red led tail rlight,2.5 inch led tail light with rubber

2.5 inch led tail light,Red Led Tail Light,led tail light with rubber,2.5 inch red led tail rlight,2.5 inch led tail light with rubber

 itle

Red LED Marker Tail Light - IP67 Waterproof 13-SMD Super Bright Multi-Function Stop/Turn/Brake Light for Trucks, Trailers, UTVs & Vehicles

Description 

Upgrade your vehicle’s visibility and safety with our Red LED Marker Tail Light! Equipped with 13 ultra-bright LEDs, IP67 waterproof rating, PMMA high-transmittance lens & ABS housing, it functions as stop/turn/brake/tail/running light for trucks, trailers, UTVs and more.

Long Description (E-E-A-T Structure)

Pain Point: Driving Safety Risks in Severe Weather

In rain, sandstorms, blizzards and other extreme conditions, factory halogen marker lights suffer from low brightness, poor light transmission, and frequent failures due to water corrosion. This not only makes your vehicle "invisible" on the road but also leads to rear-end collisions and accidents.
Generic LED lights have poor shell sealing and fragile materials, yellowing and cracking in just a few months, resulting in high replacement costs. Our Red LED Marker Tail Light solves these pain points at the root, providing all-weather safety protection!

Core Product Highlights

13 Ultra-Bright LEDs, Maximum Visibility: Equipped with 13 5MM high-brightness LED chips, the light is uniform and glare-free, with 300% higher brightness than halogen bulbs. It can be clearly recognized from 100 meters away, ensuring rear vehicles accurately capture your driving intentions even in rain or fog.


IP67 Military-Grade Waterproof, Stable in Harsh Environments: The front and rear shells are separated and sealed with special technology, achieving IP67 waterproof and dustproof rating. Sand, rain, snow and dust cannot penetrate, and it works stably at -40℃~85℃, eliminating the embarrassment of "water ingress in rain and freezing in winter".


PMMA+ABS Dual Material, Double Durability: The lens is made of high-transmittance PMMA material with 92% light transmittance, providing soft and non-glare light. The bottom shell uses high-strength ABS engineering plastic, which is impact-resistant and anti-aging, avoiding yellowing under sun exposure and cracking at low temperatures. Its lifespan is 3 times that of ordinary LED lights.


Multi-Mode Compatibility, One Light for Multiple Uses: Supports 5 modes: brake light, turn signal, marker light, running light, and parking light. No additional modification is required—directly replace the original halogen bulbs, suitable for trucks, trailers, UTVs, RVs and other vehicle types, offering excellent cost performance.

Parameter Comparison (Halogen vs Our LED Light)

Technical Specification Table


Parameter Item
Specific Specification
Light Source
13pcs 5MM LED Chips
Voltage
DC12V
Power
0.82W
Size
Round 83mm (Diameter 83mm)
Color
Red Lens + Red Light
Lens Material
PMMA (High-Transmittance Acrylic)
Housing Material
ABS Engineering Plastic
Waterproof Rate
IP67
Function
Brake/Turn Signal/Marker/Running/Parking Light
Compatibility
Trucks, Trailers, UTVs, RVs, Construction Vehicles, etc.


Parameter Comparison (Halogen vs Our LED Light)

Performance Index
Traditional Halogen Light
Our Red LED Marker Tail Light
Light Source
1 Filament
13pcs 5MM LED Chips
Power Consumption
Above 5W
0.82W
Waterproof Rating
IP40 (Basically Not Waterproof)
IP67 (Deep Waterproof)
Material
Glass + Iron Sheet
PMMA High-Transmittance Lens + ABS Housing
Lifespan
~500 Hours
~50,000 Hours
Application Scenario
Only Sunny Short Trips
All Weather + Complex Road Conditions

Application Scenarios

Whether you own a cargo truck (e.g., Ford F150, Chevrolet Silverado), camper trailer (Camper Trailer), construction vehicle (excavator, forklift), or UTV, RV, bus, this LED marker light is perfectly compatible. It serves as your vehicle’s "safety guardian" in scenarios like farm transportation, mining operations, and off-road camping.

Installation Guide

1.Locate the original marker light position on your vehicle and remove the old light (some models require removing trim panels);

2.Connect the plug (non-polar design, automatic positive/negative adaptation);

3.Tighten the fixing screws to ensure the light body fits the vehicle body;

4.Power on and test functions (verify brake/turn/marker modes one by one);

5.Complete installation and immediately enjoy upgraded safety lighting!

Compatible Vehicle Models

•Ford Series: Ford F-150 (2010-2025), Ford F-250 Super Duty (2011-2024), Ford Ranger (2015-2025)

•Chevrolet Series: Chevrolet Silverado 1500 (2007-2025), Chevrolet Colorado (2015-2025)

•RAM Series: Ram 1500 (2009-2025), Ram 2500 (2010-2024)

•Trailers/RVs: Airstream Trailer (All Series), Jayco Camper (2012-2025), Keystone RV (2010-2025)

•Construction Vehicles: Caterpillar Forklift (All Series), John Deere UTV (2018-2025)

Authentic Content Supplement

Installation & Test Video

[Embed YouTube Link: 5-Minute Disassembly & Installation + Night Brightness Comparison + IP67 Waterproof Immersion Test]

Test Photos

•Lumen Test: Professional integrating sphere test shows brightness up to 120LM, 2.5x that of halogen bulbs

•Waterproof Test: Fully functional after 24 hours of immersion in 1m water

•Night Shooting: Lighting effect comparison on rural roads/highways/rainy nights

FAQ

1.Q: Will this fit my 2022 Toyota Tacoma?

A: Yes! It’s compatible with most trucks/trailers/UTVs, including Toyota Tacoma (2005-2025). Please confirm the 83mm round size for proper fitment.

2.Q: Can it be used as a turn signal?

A: Absolutely! It supports 5 modes (including turn signal) with a plug-and-play design that fits most 12V vehicles.

3.Q: Is the IP67 waterproof rating really reliable?

A: Yes! We submerged it in 1m of water for 24 hours—no water leakage, and it worked perfectly afterward.

4.Q: How long is the lifespan?

A: 50,000 hours (≈5 years with daily use), 100x longer than halogen bulbs.

5.Q: Do I need to modify my vehicle’s wiring?

A: No! The plug-and-play design with non-polar connectors is compatible with most 12V systems.


Previous: 
Next: 

QUICK LINK

Bowang Industry 
+86-0769-81099632
+86 18925518137
2023-10-28
Welcome to communicate with us to have new desing of the LED third brake lights.....
 
Pingxiang Bowang Industry CO.,LTD.
2023-05-01
Pingxiang Bowang Industry CO.,LTD. was founded in 2014 and has always focused on the field of LED optoelectronics.
The production base is located in a modern industrial park, with a total area of more than 5,000 square meters. Our company has developed into a national high-tech enterprise integrating R&D, manufacturing and sales of LED application products.
 
 
© Copyright Dongguan Bowang Photoelectric CO.,LTD. 2021. All Rights Reserved.    粤ICP备2021050601号