Product Basic Specifications
| Item | Parameter |
| Product Code | BD-004Y2835A |
| Light Source | High Quality SMD2835 LED Chips |
| Working Voltage | DC 12V-16V |
| Rated Power | 0.9W Each Piece |
| Overall Size | 83 7440mm |
| Working Temperature | -40℃ ~ 75℃ |
| Appearance Color | Grey Outer Shell + Bright Yellow/Amber Light Output |
| Sealing Grade | IP65 Waterproof Dustproof |
| Service Life | Over 30000 Hours |
| Luminous Flux | 300+ Lumens |
| Replacement OEM Number | 68302828AA, 68302829AA |
Full Professional Product Description (E-E-A-T Standard, Long Detailed Version)
The Hidden Safety Risk of Original Factory Rearview Mirror Turn Signal Lights
For most Dodge Ram pickup truck owners, the original halogen rearview mirror turn signal lamps are often ignored daily auto parts, yet they are closely related to driving safety on urban roads, highways and off-road routes. The original equipped halogen side mirror indicator lights adopt traditional old-fashioned lighting structure, which has many inherent defects that cannot be solved in long-term use.
Firstly, the brightness attenuation speed of factory halogen bulbs is extremely fast. After using for 1 to 2 years, the light transmittance gradually decreases, and the light color becomes dim and turbid. Especially under strong direct sunlight in daytime driving, the turning signal light is difficult to be clearly recognized by vehicles behind and on both sides, which greatly increases the risk of side collision and lane changing accidents. Secondly, the original plastic shell has no high-standard sealing protection. After long-term exposure to outdoor wind, sun, rain and snow erosion, the shell is easy to age, yellow, harden and crack, resulting in rainwater, snow water, road muddy water and dust entering the lamp cavity, causing internal circuit short circuit, lamp bead water fog, light failure and other failures.
In addition, the response speed of traditional halogen lights is slow, and it takes a certain time to reach the brightest state after being lit. In bad weather such as heavy fog, heavy rain, sandstorm and dark night, the weak light penetration cannot effectively remind surrounding drivers and pedestrians of your driving intention. At the same time, the original halogen turn signal has high power consumption, which will increase the load of the vehicle circuit system invisibly, and frequent damage also makes car owners spend extra time and maintenance costs to replace accessories frequently, bringing many troubles to daily driving and vehicle maintenance.
Professional Upgrading Solution: SMD2835 LED Rearview Mirror Turn Signal Assembly
In view of all the shortcomings of the original factory halogen turn signal lights, we have professionally developed and launched this high-performance integrated LED rearview mirror turn signal assembly specially customized for Dodge Ram series pickup trucks. This product is not a simple single bulb replacement accessory, but an overall upgraded assembly that integrates high-brightness light source, high-strength shell structure, high-standard sealing technology and stable intelligent circuit design.
After repeated market verification, road actual measurement and strict laboratory environmental test, this LED side mirror turn signal perfectly makes up for all defects of the original factory accessories. It adopts mainstream high-efficiency SMD2835 professional automotive LED light source chips in the industry, with stable light emitting performance, uniform light distribution and strong penetrating power. Through professional optical lens refraction and light distribution design, it can output standard road legal amber warning light, which can quickly and clearly convey vehicle turning, lane changing and reversing driving signals in any driving scene, effectively improve the active safety performance of the whole vehicle, and bring more reassuring driving experience for drivers and passengers.
Core Superior Functions & Practical Upgrade Advantages
1. Ultra-high Bright Visibility, Instant Light Up to Improve Driving Safety
This LED turn signal lamp is built with high-density arranged SMD2835 high-efficiency LED lamp beads, with an actual luminous flux of more than 300 lumens, which is far higher than the 150-200 lumens brightness range of the original halogen lamp. The LED light source has the characteristic of instant full brightness lighting, without slow preheating and brightening process. Whether it is strong sunlight at noon, dim rainy weather, thick foggy road sections or dark night driving, the bright and eye-catching amber warning light can quickly enter the sight of surrounding vehicles and pedestrians, effectively avoid visual blind spots and recognition delays, and greatly reduce the accident rate caused by unclear turn signals.
The product adopts professional yellow light filter lens design, the light color is pure and not distorted, the warning recognition is strong, which conforms to the traffic light use standards of various regions, and will not have the problem of excessive light color deviation affecting road driving norms.
2. IP65 Full Body Sealing, Ultra-strong Weather Resistance & Durable Structure
In terms of shell structure and sealing technology, this rearview mirror turn signal has reached industrial-grade outdoor protection level. The outer shell is made of high toughness and high temperature resistant ABS engineering plastic material, which has excellent anti-aging, anti-yellowing, anti-collision and anti-fall performance. It can resist long-term ultraviolet radiation exposure, and will not be brittle, deformed or faded after long-term use. The outer layer is matched with high-transmittance optical PC clear lens, which is scratch-resistant and wear-resistant, and always maintains high light transmittance.
The internal assembly is formed by precision ultrasonic integrated welding process, forming a fully closed internal lamp cavity structure, reaching IP65 waterproof and dustproof grade in the true sense. It can effectively block rainwater, snow water, splashing muddy water, road dust, sand and other sundries from entering the inside, completely solve the common faults such as internal water fog, water inflow short circuit and lamp bead rust of the original lamp. The product can work stably in the extreme temperature environment of -40℃ to 75℃, whether it is severe cold northern snowfield driving or high-temperature southern plateau long-distance driving, it can maintain stable lighting performance without failure shutdown.
3. 100% Original Car Plug and Play, Zero Modification Easy Installation
This LED rearview mirror turn signal assembly strictly follows the original car opening size, installation position and line interface standard, perfectly matches the original car installation structure, and belongs to the direct replacement original car accessories. The product corresponds to the original factory standard part numbers 68302828AA and 68302829AA, with high matching accuracy.
In the actual installation process, car owners do not need to cut wires, arrange lines, modify circuits, match programmers or install additional load resistors and decoding accessories. They only need to disassemble the old original turn signal assembly along the reserved installation position of the rearview mirror, and directly insert the new LED turn signal plug into the original car reserved interface to complete the installation operation. The whole replacement process is simple and labor-saving, a single side can be completed in less than 10 minutes, ordinary car owners can easily operate it by themselves without professional maintenance personnel, saving a lot of installation time and maintenance labor costs. At the same time, it has built-in intelligent constant current drive circuit, perfectly compatible with the original car CANbus vehicle system, no fault alarm code, no abnormal flashing, stable and smooth use.
4. Ultra-low Power Consumption & Super Long Service Life, Save Long-term Use Cost
Compared with the original factory halogen turn signal which consumes up to 21W of power, this upgraded LED turn signal only has a single power consumption of 0.9W, which is more than 75% energy-saving and power-saving. Long-term use can effectively reduce the idle load burden of the vehicle power supply circuit system, protect the vehicle battery and line safety, and avoid circuit aging and heating failure caused by long-term high power load.
In terms of service life, the original halogen lamp is limited by the light source structure, and the average service life is only 500 to 1000 hours, which is easy to burn out and damage and needs frequent replacement. While our SMD2835 LED turn signal has been optimized and upgraded in heat dissipation structure and circuit layout, with a comprehensive service life of more than 30000 hours. Under normal daily driving use, it can be used stably for many years without frequent replacement of accessories, greatly reduce the later vehicle maintenance frequency and replacement cost, and realize one-time installation and long-term stable use.
Detailed Contrast Between Original Halogen Lamp and Our Upgraded LED Turn Signal
Brightness & Driving Safety ContrastOriginal Factory Halogen Lamp: Dim light, slow light response, low luminous flux, easy to be ignored in strong light environment, poor warning effect, great hidden danger of driving safety. Our LED Turn Signal: Instant full brightness lighting, 300+ lumens high brightness output, strong light penetration, clear recognition in all weather conditions, comprehensive upgrade of driving active safety.
Shell Structure & Environmental Resistance ContrastOriginal Factory Halogen Lamp: Ordinary plastic shell, easy to age and crack, no professional sealing design, easy to enter water and fog, unable to adapt to extreme weather use. Our LED Turn Signal: High toughness ABS grey shell + high-transmittance PC lens, ultrasonic overall sealing, IP65 waterproof and dustproof, anti-high temperature and anti-freezing, suitable for all complex road and climate environments.
Energy Consumption & Service Life ContrastOriginal Factory Halogen Lamp: High power consumption, serious power loss, short service life, frequent burnout failure, high later use cost. Our LED Turn Signal: Ultra-low 0.9W low power consumption, energy saving and environmental protection, 30000 hours long service life, stable performance and durable use.
Installation & Daily Maintenance ContrastOriginal Factory Halogen Lamp: Narrow internal space of rearview mirror, difficult and troublesome single bulb replacement operation, frequent later inspection and maintenance are required. Our LED Turn Signal: Integrated assembly direct replacement, plug and play without modification, zero daily maintenance after installation, labor-saving and worry-free.
Accurate Vehicle Compatibility Range
This high-brightness LED rearview mirror turn signal light is specially designed and produced for Dodge Ram series pickup trucks, with accurate matching models and years as follows:
Warm Purchase Reminder
Before placing an order for purchase, please carefully confirm your specific vehicle model, production year and rearview mirror appearance structure. The matching degree of this product is subject to the original factory accessory part number 68302828AA and 68302829AA. If your original rearview mirror appearance is consistent with our product display pictures and the reserved interface is unified, it can be installed and used perfectly. If you have any questions about model matching, installation steps and product performance, you can consult our professional customer service team at any time, we have professional automotive lighting industry technical personnel to provide you with all-round use guidance and after-sales service support.
As a professional manufacturer focusing on the research and development, production and sales of automotive LED lighting accessories for many years, we have always adhered to the production concept of strict selection of materials, precise production and strict quality inspection. Every batch of rearview mirror turn signal products will pass multiple strict tests such as light brightness test, waterproof and dustproof test, extreme temperature test and circuit stability test before leaving the factory, focusing on creating high-quality, high-safety and high-cost performance automotive lighting upgrade accessories for global car owners, and escorting your every safe travel.
Q: Will these LED lights cause hyper-flashing or dashboard warning lights on my Ram?
A: No. These are complete plug-and-play assemblies with integrated error-free circuitry designed specifically for your Ram's electrical system. They will function exactly like your original factory lights without causing any warning indicators.
A: This product is backed by a 1-year limited warranty that covers manufacturing defects and workmanship issues under normal use conditions. Due to the vehicle-specific nature of automotive parts, we strongly recommend that customers carefully verify compatibility using our fitment guide and product images before purchase to ensure proper fitment for your specific vehicle configuration.
