Specification：
![F250 LED brake lights GX-108WR0012A-S]( "F250 LED brake lights GX-108WR0012A-S")
1. Category Title & Meta
Title: F250 Custom LED Third Brake Light – High Mount Stop Lamp with Cargo Light, IP67 Waterproof, ABS Housing & Foam Gasket for Ford F-250 F-350 F-450 F-550 Super Duty, Ranger, Explorer Sport Trac, Mazda B-Series
Meta Description: Upgrade your truck with our F250 Custom LED Third Brake Light. Compatible with 1999–2016 Ford F-250/F-350/F-450/F-550 Super Duty, 1993–2011 Ford Ranger, 2001–2005 Ford Explorer Sport Trac and 1993–2010 Mazda B-Series. Not for vehicles without factory cargo light. Features rugged ABS housing, high-density foam gasket and IP67 waterproof rating. Model GX-108WR0012A-S. Bulk pricing, OEM & private label services available.
2. Opening Pain Point Hook
"Is your factory third brake light cracked, leaking, or too dim to be seen during heavy rain or snow? Tired of water seeping into the housing and corroding internal circuits, causing your high-mount stop lamp to malfunction?"
Factory third brake lights are easy to ignore until they fail. Weak incandescent bulbs and brittle plastic housings degrade under UV rays and constant road vibration. Poor sealing lets rain, snow and dust penetrate the assembly, corroding electrical contacts and leading to flickering or total light failure. A faulty high-mount brake light is not only a safety hazard — it can also trigger failed vehicle inspections and bring expensive repair bills.
Introducing the perfect replacement upgrade: the F250 Custom LED Third Brake Light.
Specially engineered for Ford and Mazda truck owners, this high-mount stop lamp features a sturdy ABS housing paired with a high-density foam gasket on the rear. The foam gasket creates a tight, leak-proof seal against your truck cab, blocking rain, snow and moisture ingress, backed by IP67 waterproof performance for extreme weather conditions. Instant-on LED chips deliver bright red illumination for enhanced driving safety. Built as a direct-fit replacement for simple installation. Whether you own a Ford F-250 Super Duty, Ranger, Explorer Sport Trac or Mazda B-Series, this weatherproof LED lighting upgrade is exactly what your truck needs.
3. Core Buying Guide & Technical Deep Dive
IP67 Waterproof Protection with High-Density Foam Gasket
This LED third brake light is built to stop moisture intrusion. Constructed with ABS housing and fitted with a high-density foam gasket on the backside. The foam forms a cushioned, airtight seal against your truck cab to block rain, snow and water leakage. Combined with IP67 waterproof rating, it withstands heavy rainfall, snow, dust and high-pressure car washing without internal condensation or circuit corrosion.
Heavy-Duty ABS Construction
The lamp housing uses premium tough ABS material, offering outstanding impact resistance, heat resistance and UV stability. Unlike cheap plastic housings that turn brittle and crack after long-term outdoor exposure, this ABS shell survives years of sunlight and continuous road vibration, serving as a long-lasting dependable replacement for your stock third brake light.
High-Mount LED for Improved Traffic Safety
The high-mount positioning puts the brake light at the eye level of following drivers, greatly boosting your truck’s visibility on the road. LED chips activate instantly and emit concentrated bright red light that cuts through rain, fog and darkness. This shortens the reaction time of drivers behind you and effectively reduces rear-end collision risks.
Direct Fit Compatibility for Ford & Mazda Trucks
This third brake light is custom-fit for the following vehicles:
Critical Fitment Note:
Does NOT fit models without factory cargo light. Please verify your truck is equipped with the original cargo light before checkout.
Model Number: GX-108WR0012A-S
Simple Direct-Replacement Installation
Designed as a drop-in replacement for your original high-mount stop lamp. Fast and straightforward installation to cut labor time and cost. It connects seamlessly to your factory wiring and mounts using existing OEM mounting holes. The foam gasket ensures a firm, weather-tight fit after installation.
Factory-Direct Benefits for Business Buyers
Competitive bulk pricing for fleet operators and auto wholesalers
Customized solutions to meet your business requirements
OEM service for custom branding and private labeling
Stable supply chain with reliable production lead time for automotive distributors
4. Hot Sub-Category Recommendations
Complete Your Truck’s Lighting Upgrade!
Card 1: Ford F-250/F-350/F-450/F-550 LED Tail Light Assembly
Description: Refresh your rear truck lighting with high-brightness LED tail lights. Rugged, weather-resistant design to perfectly match your new third brake light.
Card 2: Ford Super Duty LED Cab Roof Lights
Description: Boost your truck’s rugged look and front visibility. Smoked or clear lens available, easy to install for Ford Super Duty trucks.
Card 3: LED License Plate Light Housing Assembly
Description: Keep your rear lighting fully compliant. Waterproof LED assemblies to pair with your third brake light for full road safety.
Card 4: Heavy-Duty 2-Wire Trailer Wiring Harness
Description: Simplify your wiring projects. Pre-stripped waterproof wires to speed up light installation and secure electrical connections.
5. Quick Vehicle Navigation
Accurate Vehicle Compatibility Range
This high-mount LED third brake light fits:
Ford Ranger: 1993–2011
Ford F-250 Super Duty: 1999–2016
Ford F-350 Super Duty: 1999–2016
Ford F-450 Super Duty: 1999–2016
Ford F-550 Super Duty: 1999–2016
Ford Explorer Sport Trac: 2001–2005
Mazda B-Series: 1993–2010
❌ Does Not Fit Models Without Factory Cargo Light.
Note: Double-check your truck model year and confirm it comes with an original cargo light before purchasing.
6. Real Data Comparison Table
| Specs Compared | Our F250 Custom LED Third Brake Light | Generic Standard Third Brake Lights | Original Factory Halogen Third Brake Light |
| Housing Material | Durable ABS with High-Density Foam Gasket | Cheap plastic (prone to cracking) | Regular plastic (fades & cracks) |
| Waterproof Rating | IP67 Waterproof (Rain, Snow, Dust) | IP65 or lower (easy fogging) | Poor sealing (moisture leaks in) |
| Light Source | High-Brightness LEDs (Instant-On) | Low-grade LEDs | Single incandescent bulb |
| Visibility | High-Mount, Bright Red Output | Dim, slow light response | Dim, slow light response |
| Fitment | Direct Fit for Listed Ford & Mazda Trucks | Universal (needs modification) | OEM factory fit |
| Installation | Quick & Straightforward | Complicated rewiring | Socket replacement required |
| Lifespan | 30,000+ Hours | 5,000–10,000 Hours | < 1,000 Hours |
| Business Support | Bulk Pricing, OEM, Private Label | No custom service | No custom service |
7. FAQ (Common Questions)
Q1: What vehicles does this LED third brake light fit?
A1: It fits 1993–2011 Ford Ranger, 1999–2016 Ford F-250/F-350/F-450/F-550 Super Duty, 2001–2005 Ford Explorer Sport Trac, and 1993–2010 Mazda B-Series. It will not work on trucks without factory cargo lights.
Q2: How can I check if my truck has a cargo light?
A2: The cargo light is the factory lamp mounted on the rear cab to illuminate the truck bed. If your truck did not come with this feature originally, this third brake light is incompatible.
Q3: Is this brake light waterproof?
A3: Yes. Built with ABS housing and rear high-density foam gasket, it holds IP67 waterproof rating. It prevents rain, snow and moisture intrusion and stands up to dust and high-pressure washing.
Q4: Is installation hard?
A4: No. It is engineered as a direct replacement for your original high-mount stop lamp. Installation is fast and simple, reusing factory mounting points and existing wiring harness.
Q5: What is the part model number?
A5: Model number: GX-108WR0012A-S.
Q6: Does this assembly include cargo light functionality?
A6: This assembly replaces your original third brake light assembly for trucks that already have factory cargo lights. Please confirm your vehicle is equipped with a cargo light before ordering.
Q7: What advantages do you offer for wholesalers and businesses?
A7: We provide competitive bulk pricing for large orders, custom solutions and OEM/private label branding services. Ideal for fleet managers, auto parts distributors and automotive wholesalers.
Q8: What is the LED lifespan?
A8: High-brightness LEDs have a rated service life of over 30,000 hours, vastly outperforming traditional halogen bulbs and lowering your long-term replacement cost.
Q9: Can you do OEM and private label?
A9: Yes. As a professional automotive lighting manufacturer, we support OEM customization, branding and private labeling for bulk orders.
Q10: What should I do if the light does not fit or malfunction after installation?
A10: Confirm your vehicle model and cargo light compatibility prior to purchase. If any issues arise after receiving the product, reach out to our support team for help. We provide reliable products and responsive customer service.
